|
Swing Openers
Slide Openers
Barrier Gates
Swing Operators
Slide Operators
Barrier Operators
Sentex Opener Replacement Parts for HL410-11 to 440
Swing Gate Openers
Slide Gate Openers
Barrier Operators
Order Parts
Mag Locks
Swing Gate Operators
Slide
Gate Operators
Parts & Accessories
All Linear Products
Gate Lifting Hinges
| |
FAAC
Model 820 Slide Gate Operator
FAAC is the undisputed world leader in automated
gate opener systems for opening gates, doors and garage doors.
|
|
MODEL 820 SLIDE GATE
OPERATORS
|
| |
The Model 820 CD is shown here with chain (left) and rack &
pinion (right) configurations. The chain configuration also shows
the slide gate installation kit. |
THE
MODEL 820 is designed for moderate pulling force requirements in
high traffic applications applications. Available in chain and
rack&pinion versions. Model 820 has 2 year limited warranty.
Installation
Manual
Parts Manual ACCESSORIES
- GentleSlide TM Motion Management Oil
immersed clutch and electronic clutch which, when properly adjusted,
will sense an obstacle to gate travel. Upon sensing an obstacle when
the gate is closing, the operator will move the gate to the open
position. Sensing an obstacle upon opening will cause the gate to
stop. The gate will not move again until an external activation signal
is received.
- Continuous duty operation
- Internal limit switches
- “Soft Stop” on opening (except partial
opening) and closing
- 1/2 hp motor . Manual release (non-keyed
standard)
- Selectable delayed opening and closing (to allow
for warning light activation)
- 230 VAC
MODEL 820 CHAIN KITS INCLUDE: Operator Control panel (826
MPS) Sprocket Idlers and protective cover Leveling hardware chain-to-gate
mounting hardware with nickel plated master links
MODEL 820 RACK & PINION KITS INCLUDE: Operator
Control panel (826 MPS) Pinion Leveling hardware
FEATURES:
Gentle Slide™ Motion Management: Oil immersed
clutch and electronic clutch which when properly adjusted, will sense an
obstacle to gate travel. Upon sensing an obstacle when the gate is
closing, the operator will move the gate to the open position. Sensing an
obstacle upon opening will cause the gate to stop. The gate will not move
again until external activation signal is received. Continues duty
operation Internal limit switches "Soft Stop" on opening and
closing 1/2 hp motor Manual release (non-keyed standard) Selectable
delayed opening and closing (to allow for warning light activation)
Microprocessor Control: Choose from 8 operating models: a) 2 kinds of
garage-door-like logic (signal to open, signal to close) b) 2 kinds of
automatic logic (signal to open, then close after selectable time period c)
2 kinds of security logic (for anti tailgating) d) 2 kinds of logic for an
attended gate
We are a FAAC
Authorized Sales & Service Distributor.
Only buy from an authorized FAAC Distributor for parts and warrantee
repair. |
|
MODEL 820 SLIDE GATE OPERATOR
KITS
|
| MODEL |
PART
NUMBER
|
TYPE |
PULLING
FORCE |
MAX
GATE
LENGTH |
PARTIAL
OPENING |
|
|
820
Z16(16 tooth sprocket)
(with Installation Kit 3501) |
820
C2CE-01-16 |
CHAIN
(nickel plated
chain included) |
45
lbs |
33
ft |
5
ft |
|
|
820
Z16(16 tooth sprocket)
(with Installation Kit 3501) |
820
C2CE-S1-16 |
CHAIN
(stainless steel
plated chain included) |
45
lbs. |
33
ft |
5
ft |
|
|
820
Z20(20 tooth sprocket)
(with Installation Kit 3501) |
820
C2CE-01-20 |
CHAIN
(nickel plated
chain included) |
35
lbs |
42
ft |
6
ft |
|
|
820
Z20(20 tooth sprocket)
(with Installation Kit 3501) |
820
C2CE-S1-20 |
CHAIN
(stainless steel
plated chain included) |
45
lbs. |
33
ft |
6
ft |
|
|
820
Z16(16 tooth sprocket)
(without Inst. Kit or chain) |
820
C2CE-NP-16 |
CHAIN
(not included) |
45
lbs |
33
ft |
5
ft |
|
|
820
Z20(20 tooth sprocket)
(without Inst. Kit or chain) |
820
C2CE-NP-20 |
CHAIN
(not included) |
45
lbs. |
33
ft |
6
ft |
|
|
820
Z16(16 tooth pinion)
(with Installation Kit 3503) |
820
C2RE-03-16 |
RACK
& PINION (included) |
45
lbs |
33
ft |
5
ft |
|
|
820
Z20(20 tooth pinion)
(with Installation Kit 3503) |
820
C2RE-03-20 |
RACK
& PINION (included) |
35
lbs |
42
ft |
6
ft |
|
|
820
Z16(16 tooth pinion)
(without Installation Kit) |
820
C2RE-NK-16 |
RACK
& PINION (included) |
45
lbs |
33
ft |
5
ft |
|
|
820
Z20(20 tooth pinion)
(without Installation Kit) |
820
C2RE-NK-20 |
RACK
& PINION (included) |
35
lbs |
42
ft |
6
ft |
|
|
|
MODEL
820 INSTALLATION KITS FOR CHAIN AND RACK & PINION OPERATORS
|
| PART
NUMBER |
DESCRIPTION |
|
| FAAC3501 |
Slide
Installation Kit with Pedestal for chain operators include-
30ft nickel plated chain, mounting pedestal, NEMA4 fiberglass
enclose with backplate and power switch, hardware set for
enclosure-to-pedestal attachment, 2 sets of conduit and connectors
for conducting enclosure to operator, 2 caution signs |
|
| FAAC35S1 |
Slide
Installation Kit with Pedestal for chain operators include-
same as above but with 30ft stainless steel chain |
|
| FAAC3503 |
Slide
Installation Kit with Pedestal for rack & pinion operators
include- 23ft gear
rack, mounting pedestal, NEMA4 fiberglass enclosure-to-pedestal
attachment, 2 sets of conduit and connectors for connection
enclosure to operator, 2 caution signs |
|
| FAAC3505 |
Slide
Installation Kit with Foundation Kit for rack & pinion
operators include-
23ft gear rack, foundation plate, NEMA4 fiberglass
enclosure-to-pedestal attachment, 2 caution signs |
|
|
|
ACCESSORIES FOR MODEL 820 SLIDE OPERATORS
|
| PART
NUMBER |
PART
NUMBER |
|
| FAAC2000 |
Nickel
Plated Chain - #40
nickel plated chain, comes with two master links with each length
of chain you order |
|
| FAAC2002 |
Stainless
Steel Plated Chain -
you receive two master links with each length of chain you order |
|
| FAACCTG01 |
Chain-to-Gate
Mounting Hardware -
the hardware needed to attach the two ends of nickel plated chain
to the gate. Includes 2 mounting brackets, 2 tension bolts and 2
master links (all nickel plated) |
|
| FAACCTGS1 |
Chain-to-Gate
Mounting Hardware -
the hardware needed to attach the two ends of stainless steel
plated chain to the gate. Includes 2 mounting brackets, 2 tension
bolts and 2 master links (all stainless steel plated) |
|
| FAAC719323 |
Gear
Rack - the galvanized
steel rack section measures 3.28ft long and works with any FAAC
slide gate operators. Supplied with rack-to-gate hardware |
|
| FAAC
423002 |
Foundation
Plate (for ground level mounting) -
the plate measures 6 x 10.5 in. and has rebar anchors to be set in
the concrete pad |
|
| FAAC2411 |
Mounting
Pedestal (for elevated mounting) -
18 in. galvanized mounting pedestal |
|
|
|
Installation Kits with pedestal
for
CHAIN DRIVEN operators 3501* and 35S1*
- 30’ nickel plated chain (Kit
35S1* has stainless steel chain)
- Mounting pedestal
- 8” x 10” X 5.5” NEMA 4
fiberglass enclosure with backplate and power switch
- Hardware set for enclosure to
pedestal attachment
- enclosure to operator 2 sets of
conduit and connectors for connecting enclosure to
operator
- 2 caution signs
|
|
|
|
Installation Kits with pedestal
for
RACK&PINION operators 3503*
- 23’ gear rack
- Mounting pedestal
- 8” x 10” X 5.5” NEMA 4
fiberglass enclosure with backplate and power switch
- Hardware set for enclosure to
pedestal attachment
- 2 sets of conduit and connectors
for connecting enclosure to operator
- 2 caution signs
|
|
|
|
Why Buy from Upswung Corp?