|
Swing Openers
Slide Openers
Barrier
Gates
Swing Operators
Slide Operators
Barrier
Operators
Sentex Opener Replacement Parts for HL410-11 to 440
Swing Gate Openers
Slide Gate Openers
Barrier Operators
Order Parts
Mag Locks
Swing Gate Operators
Slide Gate Operators
Parts & Accessories
All Linear Products
Gate Lifting Hinges
|
FAAC Model 844 Slide
Gate Operator
FAAC is the undisputed world leader in automated gate
opener systems for opening gates, doors and garage doors.
|
MODEL
844 LIMITED DUTY INDUSTRIAL SLIDE GATE OPERATORS
|
 
 
Model 844 Slide Gate Operator
Installation
Manual
Parts Manual
THE MODEL 844 designed for limited duty industrial
applications. Available in chain and rack&pinion versions. Model 844
has 2 year limited warranty
MODEL 844 CHAIN KITS INCLUDE: Operator Control panel (844
MPS) Sprocket Idlers and protective cover Easy install limit switch plates
Mounting angle brackets Chain-to-gate mounting hardware with nickel plated
master links Chain is not included
MODEL 844 RACK & PINION KITS INCLUDE: Operator Control panel
(844 MPS) Pinion Mounting angle bracket Limit Switch plates
- 230 VAC
- External limits
- Manual release (non-keyed)
- “Soft Stop” on opening and closing
- 3/4 hp motor
- Oil immersed clutch which, when properly
adjusted,
limits the amount of pressure the operator can apply to moving the
gate.
- Duty Cycle: 30% motor run time
- Microprocessor control:
Choose from 4 operating modes:
- signal to open, signal to close
- automatic logic
- security logic
- S2 security logic
We are a FAAC Authorized Sales &Service
Distributor
Call 775-588-1475 for Special Pricing
|
|
MODEL 844 SLIDE
GATE OPERATOR WITH OIL IMMERSED CLUTCH KITS
|
|
MODEL |
PART
NUMBER
|
TYPE |
PULLING
FORCE |
|
|
844
Z16
(16 tooth sprocket) |
844
M2CO-NP-16 |
CHAIN
(not included) |
125
lbs |
|
|
844
Z20
(20 tooth sprocket) |
844
M2CO-NP-20 |
CHAIN
(not included) |
125
lbs. |
|
|
844
Z16
(16 tooth sprocket) |
844
M2RO-NK-16 |
RACK
& PINION
(not included) |
125
lbs |
|
|
844
Z20
(20 tooth sprocket) |
844
M2RO-NK-20 |
RACK
& PINION
(not included) |
125
lbs. |
|
|
|
Maximum
Gate Length is limited by the Pulling Force requirement and the 844's
maximum motor run time of four minutes |
MODEL
844 INSTALLATION KITS FOR CHAIN AND RACK & PINION OPERATORS-
If your operator has a rack & pinion drive, do you want a pedestal or
foundation plate? Refer to the proper kit description below for you
installation |
|
PART
NUMBER |
DESCRIPTION |
|
|
FAAC3501 |
Slide
Installation Kit with Pedestal for chain operators include- 30ft
nickel plated chain, mounting pedestal, NEMA4 fiberglass enclose with
backplate and power switch, hardware set for enclosure-to-pedestal
attachment, 2 sets of conduit and connectors for conducting enclosure to
operator, 2 caution signs |
|
|
FAAC35S1 |
Slide
Installation Kit with Pedestal for chain operators include- same
as above but with 30ft stainless steel chain |
|
|
FAAC3503 |
Slide
Installation Kit with Pedestal for rack & pinion operators include-
23ft gear rack, mounting pedestal, NEMA4 fiberglass enclosure-to-pedestal
attachment, 2 sets of conduit and connectors for connection enclosure to
operator, 2 caution signs |
|
|
FAAC3512 |
Slide
Installation Kit with Foundation Kit for rack & pinion operators
include- 23ft gear rack, foundation plate, NEMA4 fiberglass
enclosure-to-pedestal attachment, 2 caution signs |
|
|
ACCESSORIES
FOR MODEL 844 SLIDE OPERATORS |
|
PART
NUMBER |
PART
NUMBER |
|
|
FAAC2000 |
Nickel
Plated Chain - #40 nickel plated chain, comes with two master
links with each length of chain you order |
|
|
FAAC2002 |
Stainless
Steel Plated Chain - you receive two master links with each
length of chain you order |
|
|
FAACCTG01 |
Chain-to-Gate
Mounting Hardware - the hardware needed to attach the two ends of
nickel plated chain to the gate. Includes 2 mounting brackets, 2 tension
bolts and 2 master links (all nickel plated) |
|
|
FAACCTGS1 |
Chain-to-Gate
Mounting Hardware - the hardware needed to attach the two ends of
stainless steel plated chain to the gate. Includes 2 mounting brackets, 2
tension bolts and 2 master links (all stainless steel plated) |
|
|
FAAC719323 |
Gear
Rack - the galvanized steel rack section measures 3.28ft long and
works with any FAAC slide gate operators. Supplied with rack-to-gate
hardware |
|
|
FAAC2278 |
Foundation
Plate (for ground level mounting) - the plate measures 6 x 10.5
in. and has rebar anchors to be set in the concrete pad |
|
|
FAAC2411 |
Mounting
Pedestal (for elevated mounting) - 18 in. galvanized mounting
pedestal |
|
|
Why Buy from
Upswung?