AKR-1 STAND ALONE DIGITAL Keyless Entry
The Linear Access AKR-1 has all the
features of the AK-1 plus a built-in radio receiver. It
can store up to 480 user codes plus 480 block coded transmitters.
Details: The access control AKR-1 is a digital keypad entry system that
includes a built-in radio receiver. It allows use of up to 480 block coded
transmitters, in addition to 480 traditional keypad entry codes. Users can be
assigned either type of code for system access. Two relay outputs are provided:
one for gate or door access; the other for gate obstacle control using the MGT,
the industry’s only supervised safety edge transmitter. If an MGT is not used,
the second relay can control another door or gate. Installation and set-up are
simple. The AKR-1 operates on 12-24 volts, ac or dc. It can be powered directly
from the radio power output of most gate operators. Learning, suspending, or
deleting entry codes or transmitters is as easy as pressing a few keys on the
AKR-1’s built-in keypad Program data is stored in non-volatile EEPROM; data
retention is in excess of 10 years, even in the event of a power failure. The
AKR-1 is compatible with all of Linear access block coded transmitters, which
are programmed and supplied in sequential order. Each transmitter is labeled
with its unique ID code and also has a facility code. The combination of these
two codes provides the same level of security as a traditional Wiegand swipe or
proximity card.
Features:
- Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities.
- Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal.
- Four independent outputs and timers: two form C relays and two solid-state open collector outputs.
- Up to 480 programmable input codes of one to six digits each for activating either or both relays.
- Two LED indicators show system status.
- Key operating features include: door sense input; inhibit input; request-to-enter input; alarm shunt output; timed anti-passback; and keypad lockout.
- Down light illuminates whenever keypad is used.
- Tactile and audible feedback.
-
Keylock secures keypad to mounting backplate.
General Specifications:
Dimensions: 4.00 in W x 5.50 in H x 3.00 in D (101.6 x 139.7 x 76.2)
ELECTRICAL
Voltage: 12-24 Volts ac or dc (ac supply must be transformer isolated)
Current: 10 mA typical, 150 mA maximum
Outputs: Relay #1, Form "C" 5 Amps @ 24 Volts maximum; Relay#2, Form "C" 1 Amp @ 24 Volts maximum; solid-state outputs (Outputs #3 and #4), short-to-common 100 mA@ 30 Vdc maximum
ENVIRONMENTAL
Temperature: -20° F to +130° F (-29° C to +54° C)
Humidity: 5% to 95% non-condensing
| Linear Access | List Price | Internet Price | |
| AKR-1 ACP00747 | $489.00 | $277.00 |  |
