LIRE-1G RESIDENTIAL TELEPHONE ENTRY

access control
download brochure
download manual

  • Striking appearance in any setting.
  • Two general purpose relays for maximum system functionality.
  • Built-in wireless MegaCode radio and antenna.
  • Voice prompts. User and owner friendly.
  • Full-featured telephone with intercom modes.
  • Easy to install and program.
  • Capacity for 100 entry codes for commercial sites.
LIRE-1G TELEPHONE ENTRY PRICE: $928.00   Call 775-588-1475 for special pricing

GENERAL SPECIFICATIONS:
OUTPUTS:
Relay: Two form “C “ relays rated at 3A @ 30 Vac or Vdc. Each programmable for control, obstacle, alarm or shunt.
Sounder: Programmable for key presses and relay activation.
Voice: Synthesized human voice prompts for visitor and programming assistance. Voice is heard through speaker and remote telephones.
INPUTS:
RF: integral 318 MHz super heterodyne receiver @ -100dBm sensitivity (typical); receives Linear block coded transmitters and MGT supervised reversing edge transmitters
Open Request: terminal input for each relay; when activated, will trigger the assigned relay for the programmed relay on time
Door Sense/Inhibit: terminal input for each relay monitors status of a protected entry point or can be programmed to restrict access to the assigned relay
Keypad: 12 digit telephone style keypad for accepting entry codes and for local programming
Power: 16 Vac (transformer included); input for externally charged 12 to 24 Vdc battery backup
Current Draw (dialing out to one phone): 16 Vac: 270 mA standby, 440 mA operating, 12 Vdc: 250 mA standby, 500 mA operating, 24 Vdc 150 mA standby, 300 mA operating 16 Vac: 270 mA standby, 440 mA operating, 12 Vdc: 250 mA standby, 500 mA operating, 24 Vdc 150 mA standby, 300 mA operating
Operating Temperature: -22°F to 149°F (-30°C to 65°C)
PROGRAMMING:
Programming: Locally via keypad; remotely via touchtone telephone phone or computer with modem running a web browser. NO SOFTWARE REQUIRED
Memory: All data memory is stored in non volatile EEPROM with data retention in excess of 10 years
Clock/Calendar: 24/7 clock/calendar with battery backup used for time zones; relay hold open times; date/time stamp for event log entries; downlight on/off times
Connections: All power, telephone, relay and control connections to the unit are with plug on screw terminal blocks; RJ-45 and BNC connections for optional RE-BWC camera kit
PROGRAMMING:
Programming: Locally via keypad; remotely via touchtone telephone phone or computer with modem running a web browser. NO SOFTWARE REQUIRED
Memory: All data memory is stored in non volatile EEPROM with data retention in excess of 10 years
Clock/Calendar: 24/7 clock/calendar with battery backup used for time zones; relay hold open times; date/time stamp for event log entries; downlight on/off times
Connections: All power, telephone, relay and control connections to the unit are with plug on screw terminal blocks; RJ-45 and BNC connections for optional RE-BWC camera kit
STANDARD EQUIPMENT:
RE-1: Residential telephone entry system that is capable of sharing an existing phone line, a dedicated line and dialing out up to 3 additional off site numbers or used in as an intercom; integral keypad used to accept entry codes; integral radio receiver will accept signals from block coded transmitters; built-in clock calendar; voice prompts; accepts one remote keypad; provisions for dealer installed (not included) Knox switch; telephone bypass switch
 
Gate operator installations should be completed by a qualified installer only. Upswung Corp  assumes no liability if product is installed incorrectly. Please see owners / installation instructions for complete details.
For Sales Information
mail@upswung.com
 
      TELEPHONE:  775-588-1475          FAX: 775-588-1473 
      HOURS 
7:30 to 4:00 Mon.-Fri.

        
Terms /Conditions & Return Policy